TM315-GAME

Specification：

• Apply to coin’s diameter = 18m/m –29m/m


• Apply to coin’s thickness = 1.2m/m – 3.0m/m


• Work voltage           = DC12V ± 20%


• Temperature           =-20℃~50℃

1.  Operate with the game machine’s standard. Switch to the correct mode  with Normal Open(N.O) and Normal Close (N.C.)  Usually use Normal  Open .

2.   Switch to the correct speed (pulse) of coin machine.

     FAST :25ms(short pulse signal)

     MEDIUM:45ms(medium pulse signal)

     SLOW:65ms(long pulse signal by TIMER SWITCH for synchronizing with your machine)

3.   When the coin acceptor is used , the coin setting switch needs to be set correctly according to the coin that was selected .

4.     The switch which for adjusting the coin’s value , can setup several   coins come out one signal or cancel the programmed coin.When program the several coins come out one signal, the initial setting is two tone “BI~BI”, it means after you deposit two coins it’ll send out one signal .Press the switch again, it’ll have one more “BI” tone ,and like the same,the more it’ll happen five coins come out a signal .

5.     The switch for test the coin’s sensitive degree,  it detects    the   difference between real/fake coin ,when inserted .

6.   Please turn power about 10 minutes before using or setting,you can get
      the optimal effect.

7.      Connecting instructions of connector:
Red line ——DC+12V (V+)
White line——COIN Signal (COIN)     
Black line ——Ground (GND)
Brown line——Counter (COUNTER), (when don’t connect to counter, this line can  unused)

Blue line——Control line (CONTROL), (if necessary)Apply to coin's